Stereotaxis (STXS) Risk Factors

We subcontract all or part of the manufacture and assembly of components of our products and devices. The products we design may not satisfy all of the performance requirements of our customers and we may need to improve or modify the design or ask our subcontractors to modify their production process in order to do so. In addition we, or our subcontractors, may experience quality problems, substantial costs and unexpected delays related to efforts to upgrade and expand manufacturing, assembly and testing capabilities. If we incur delays due to quality problems or other unexpected events, our revenue may be impacted.

As described in Note 9 of the accompanying notes to the consolidated financial statements in Part I, Item 1 of this Form 10-Q, on February 23, 2021, the Company`s Board of Directors, upon recommendation of the Compensation Committee, approved the grant of the Performance Share Unit Award ("CEO Performance Award") pursuant to the CEO Performance Share Unit Award Agreement (the "PSU Agreement"), to David L. Fischel, the Company's Chief Executive Officer. Under the terms of the PSU Agreement, we will incur significant additional stock-based compensation expense over the term of the award regardless of whether or not any of the milestones are achieved as the probability of meeting the ten market capitalization milestones is not considered in determining the timing of expense recognition. The expense will be recognized on an accelerated basis through 2030. Total stock-based compensation recorded as operating expense for the CEO Performance Award was $4.3 million for the nine months ended September 30, 2021. As of September 30, 2021, the Company had approximately $53.1 million of total unrecognized stock-based compensation expense remaining under the CEO Performance Award if Mr. Fischel continues to serve as CEO, or in a similar capacity, through 2030. This additional stock-based compensation expense, incurred regardless of whether or not any milestones are achieved, increases the difficulty for the Company to achieve a profitable position as measured by generally accepted accounting principles.

Our commercial success depends in part on obtaining patent and other intellectual property right protection for the technologies contained in our products and on successfully defending these rights against third party challenges. The patent positions of medical device companies, including ours, can be highly uncertain and involve complex and evolving legal and factual questions. We cannot assure you that we will obtain the patent protection we seek, that any protection we do obtain will be found valid and enforceable if challenged or that it will confer any significant commercial advantage. U.S. patents and patent applications may also be subject to interference proceedings and U.S. patents may be subject to re-examination proceedings in the U.S. Patent and Trademark Office, and foreign patents may be subject to opposition or comparable proceedings in the corresponding foreign patent office, which proceedings could result in either loss of the patent, or denial of the patent application, or loss or reduction in the scope of one or more of the claims of the patent or patent application. In addition, such interference, re-examination, and opposition proceedings may be costly. Thus, any patents that we own or license from others may not provide any protection against competitors. Our pending patent applications, those we may file in the future, or those we may license from third parties may not result in patents being issued and certain foreign patent applications for medical related devices and methods may be found unpatentable. If issued, they may not provide us with proprietary protection or competitive advantages against competitors with similar technology. Some of our technology was developed in conjunction with third parties, and thus there is a risk that a third party may claim rights in our intellectual property. Outside the U.S., we rely on third-party payment services for the payment of foreign patent annuities and other fees. Non-payment or delay in payment of such fees, whether intentional or unintentional, may result in loss of patents or patent rights important to our business. Many countries, including certain countries in Europe, have compulsory licensing laws under which a patent owner may be compelled to grant licenses to third parties (for example, the patent owner has failed to "work" the invention in that country, or the third party has patented improvements). In addition, many countries limit the enforceability of patents against government agencies or government contractors. In these countries, the patent owner may have limited remedies, which could materially diminish the value of the patent. We also cannot assure you that we will be able to develop additional patentable technologies. If we fail to obtain adequate patent protection for our technology, or if any protection we obtain becomes limited or invalidated, others may be able to make and sell competing products, impairing our competitive position. Our trade secrets, nondisclosure agreements and other contractual provisions to protect unpatented technology provide only limited and possibly inadequate protection of our rights. As a result, third parties may be able to use our unpatented technology, and our ability to compete in the market would be reduced. In addition, employees, consultants and others who participate in developing our products or in commercial relationships with us may breach their agreements with us regarding our intellectual property, and we may not have adequate remedies for the breach. Our competitors may independently develop similar or alternative technologies or products that are equal or superior to our technology and products without infringing any of our patent or other intellectual property rights, or may design around our proprietary technologies. Our competitors may acquire similar or even the same technology components that are utilized in our current offering eroding some differentiation in the marketplace. In addition, the laws of some foreign countries do not protect intellectual property rights to the same extent, as do the laws of the U.S., particularly in the field of medical products and procedures.

We depend on contract manufacturers to produce and assemble certain of the components of our systems and other products such as our electrophysiology catheter advancement device and other disposable devices. We also depend on various third party suppliers for the magnets we use in our robotic magnetic navigation system and certain components of our Odyssey Solution. In addition, some of the components necessary for the assembly of our products are currently provided to us by a single supplier, including the magnets for our robotic magnetic navigation system and certain components of our Odyssey Solution, and we generally do not maintain large volumes of inventory. Our reliance on these third parties involves a number of risks, including, among other things, the risk that: - we may not be able to control the quality and cost of our system or respond to unanticipated changes and increases in customer orders;         - we may lose access to critical services, materials, or components, resulting in an interruption in the manufacture, assembly and shipment of our systems; and         - we may not be able to find new or alternative components for our use or reconfigure our system and manufacturing processes in a timely manner if the components necessary for our system become unavailable. If any of these risks materialize, it could significantly increase our costs and impair product delivery. Lead times for materials and components ordered by us and our contract manufacturers vary and depend on factors such as the specific supplier, contract terms and demand for a component at a given time. We, and our contract manufacturers, acquire materials, complete standard subassemblies and assemble fully configured systems based on sales forecasts. If orders do not match forecasts, we, as well as our contract manufacturers, may have excess or inadequate inventory of materials and components. In addition, if these manufacturers or suppliers stop providing us with the components or services necessary for the operation of our business, we may not be able to identify alternate sources in a timely fashion. Any transition to alternate manufacturers or suppliers would likely result in operational problems and increased expenses and could delay the shipment of or limit our ability to provide our products. We cannot assure you that we would be able to enter into agreements with new manufacturers or suppliers on commercially reasonable terms or at all. Additionally, obtaining components from a new supplier may require a new or supplemental filing with applicable regulatory authorities and clearance or approval of the filing before we could resume product sales. Any disruptions in product flow may harm our ability to generate revenue, lead to customer dissatisfaction, damage our reputation and result in additional costs or cancellation of orders by our customers. We also rely on Biosense Webster and other parties to manufacture a number of disposable interventional devices for use with our robotic magnetic navigation system. If these parties cannot manufacture sufficient quantities of disposable interventional devices to meet customer demand, or if their manufacturing processes are disrupted, our revenue and profitability would be adversely affected.

We purchase the permanent magnets for our robotic magnetic system from a manufacturer that uses material produced in Japan, and we anticipate that a certain amount of the production work for these magnets will be performed for this manufacturer in China. Given the complex relationships between China and the U.S., political, diplomatic, military, or other events could result in business disruptions, including increased regulatory enforcement against companies, tariffs, trade embargoes, and export restrictions relating to this production work. For example, in 2020, the U.S. government amended the Entity List rules to expand the requirement to obtain a license prior to the export of certain technologies. In addition, in 2020, a new U.S. regulation seeks to prohibit the U.S. government from contracting with companies who use the products or services of certain Chinese companies. While we believe do not that these regulations materially impact our business at this time, we cannot predict the impact that additional regulatory changes may have on our business in the future, which could adversely affect our business operations in China, or may otherwise limit our ability to offer our products and services in China and other parts of the world. In addition, our subcontractor may purchase magnets for our disposable interventional devices directly from a manufacturer in Japan. The relationships with these manufacturers and suppliers are generally on a purchase order basis and do not provide a contractual obligation to provide adequate supply or acceptable pricing on a long-term basis. These vendors could discontinue sourcing or supplying these magnets at any time. If any of our significant vendors were to discontinue their relationship with us or with our subcontractor, or if the factories were to suffer a disruption in their production, we may be unable to replace the vendors in a timely manner, which could result in short-term disruption to our supply of magnets as we transition our orders to new vendors or factories which could, in turn, cause a significant increase in price or a disruption of imports, including the imposition of import restrictions, could adversely affect our business, financial condition and results of operations. The flow of components from our vendors could also be adversely affected by financial or political instability or travel restrictions or bans in any of the countries in which the goods we purchase are manufactured, if the instability or restriction affects the production or export of product components from those countries. Trade restrictions in the form of tariffs or quotas, or both, could also affect the importation of those product components and could increase the cost and reduce the supply of products available to us. For example, the previous administration implemented, or was considering the imposition of, tariffs on certain foreign goods, and we cannot predict the ongoing status of tariffs or any further potential legislation or actions taken by the U.S. federal government that restrict trade, such as additional tariffs, trade barriers, and other protectionist or retaliatory measures taken by governments in Europe, Asia, and other countries, could adversely impact our ability to sell products and services, which could increase the cost of our products and the components and raw materials that go into making them. Countries may also adopt other protectionist measures that could limit our ability to offer our products and services. In addition, decreases in the value of the U.S. dollar against foreign currencies, or significant price increase from these suppliers, could increase the cost of products we purchase from overseas vendors.

Successfully commercializing our products depends in part on not infringing patents held by third parties. It is possible that one or more of our products, including those that we have developed in conjunction with third parties, infringes existing patents. We may also be liable for patent infringement by third parties whose products we use or combine with our own and for which we have no right to indemnification. In addition, because patent applications are maintained under conditions of confidentiality and can take many years to issue, there may be applications now pending of which we are unaware and which may later result in issued patents that our products infringe. Determining whether a product infringes a patent involves complex legal and factual issues and may not become clear until finally determined by a court in litigation. Our competitors may assert that our products infringe patents held by them. Moreover, as the number of competitors in our market grows the possibility of a patent infringement claim against us increases. If we were unsuccessful in obtaining a license or redesigning our products, we could be subject to litigation. If we lose in this kind of litigation, a court could require us to pay substantial damages or prohibit us from using technologies essential to our products covered by third-party patents. An inability to use technologies essential to our products would have a material adverse effect on our financial condition, results of operations and cash flow and could undermine our ability to continue operating as a going concern.

Infringement actions, validity challenges and other intellectual property claims and proceedings, whether with or without merit, can be expensive and time-consuming and would divert management's attention from our business. We have incurred, and expect to continue to incur, substantial costs in obtaining patents and may have to incur substantial costs defending our proprietary rights. Incurring such costs could have a material adverse effect on our financial condition, results of operations and cash flow.

The robotic magnetic navigation system is designed to have the potential for expanded applications beyond electrophysiology and interventional cardiology, including congestive heart failure, structural heart repair, interventional neurosurgery, interventional neuroradiology, peripheral vascular, pulmonology, urology, gynecology and gastrointestinal medicine. However, we have limited financial and managerial resources and, therefore, may be required to focus on products in selected industries and sites and to forego efforts with regard to other products and industries. Our decisions may not produce viable commercial products and may divert our resources from more profitable market opportunities. Moreover, we may devote resources to developing products in these additional areas but may be unable to justify the value proposition or otherwise develop a commercial market for products we develop in these areas, if any. In that case, the return on investment in these additional areas may be limited, which could negatively affect our results of operations.

Our products incorporate many components, including sophisticated computer software. Complex software frequently contains errors, especially when first introduced. Because our products are designed to be used to perform complex interventional procedures, we expect that physicians and hospitals will have an increased sensitivity to the potential for software defects. We cannot assure you that our software or other components will not experience errors or performance problems in the future. If we experience software errors or performance problems, we would likely also experience: - loss of revenue;         - delay in market acceptance of our products;- damage to our reputation;         - additional regulatory filings;         - product recalls;         - increased service or warranty costs; and/or         - product liability claims relating to the software defects.

Our products are medical devices that are subject to extensive regulation in the U.S. and in foreign countries where we do business. Each medical device that we wish to market in the U.S. must be designated as exempt from premarket approval or notification, or first receive either a 510(k) clearance, de novo approval, or a pre-market approval, or PMA, from the U.S. FDA pursuant to the Federal Food, Drug, and Cosmetic Act, or FD&C Act. The FDA's 510(k) clearance process usually takes from four to 12 months, but it can take longer. The process of obtaining PMA approval is much more costly, lengthy, and uncertain, generally taking from one to three years or even longer. Although we have 510(k) clearance for many of our products, including disposable interventional devices, and we are able to market these products commercially in the U.S., our business model relies significantly on revenue from new disposable interventional devices, some of which may not achieve FDA clearance or approval. We cannot assure you that any of our devices will not be required to undergo the lengthier and more burdensome PMA process. We cannot commercially market any disposable interventional devices in the U.S. until the necessary clearances or approvals from the FDA have been received. In addition, we are working with third parties to co-develop disposable products. In some cases, these companies are responsible for obtaining appropriate regulatory clearance or approval to market these disposable devices. If these clearances or approvals are not received or are substantially delayed or if we are not able to offer a sufficient array of approved disposable interventional devices, we may not be able to successfully market our system to as many institutions as we currently expect, which could have a material adverse impact on our financial condition, results of operations and cash flow. Furthermore, obtaining 510(k) clearances, de novo approvals, PMAs or PMA supplement approvals, from the FDA could result in unexpected and significant costs for us and consume management's time and other resources. The FDA could ask us to supplement our submissions, collect non-clinical data, conduct clinical trials or engage in other time-consuming actions, or it could simply deny our applications. In addition, even if we obtain a 510(k) clearance, de novo approvals, or PMA or PMA supplement approval, the clearance or approval could be revoked or other restrictions imposed if post-market data demonstrates safety issues or lack of effectiveness. We cannot predict with certainty how, or when, the FDA will act on our marketing applications. If we are unable to obtain the necessary regulatory approvals, our financial condition and cash flow may be adversely affected. Also, a failure to obtain approvals may limit our ability to grow domestically and internationally.

Even after product clearance or approval, we must comply with continuing regulation by the FDA and other authorities, including the FDA's Quality System Regulation, or QSR, requirements, labeling and promotional requirements and medical device adverse event and other reporting requirements. Any failure to comply with continuing regulation by the FDA or other authorities could result in enforcement action that may include suspension or withdrawal of regulatory approvals, recalling products, ceasing product manufacture and/or marketing, seizure and detention of products, paying significant fines and penalties, criminal prosecution and similar actions that could limit product sales, delay product shipment and harm our profitability. Congress could amend the FD&C Act, and the FDA could modify its regulations promulgated under this law or its policies in a way to make ongoing regulatory compliance more burdensome and difficult. Additionally, any modification to a FDA 510(k) cleared or de novo-approved device that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance. Modifications to a PMA approved device or its labeling may require either a new PMA or PMA supplement approval, which could be a costly and lengthy process. In addition, if we are unable to obtain approval for key applications, we may face product market adoption barriers that we cannot overcome. In the future, we may modify our products after they have received clearance or approval, and we may determine that new clearance or approval is unnecessary. We cannot assure you that the FDA would agree with any of our decisions not to seek new clearance or approval. If the FDA requires us to seek clearance or approval for any modification that we determined to not require clearance or approval in the first instance, we could be subject to enforcement sanctions and we also may be required to cease marketing or recall the modified product until we obtain FDA clearance or approval which could also limit product sales, delay product shipment and harm our profitability. In many foreign countries in which we market our products, we are subject to regulations affecting, among other things, product standards, packaging requirements, labeling requirements, import restrictions, tariff regulations, duties and tax requirements. Many of these regulations are similar to those of the FDA or other U.S. regulations. In addition, in many countries the national health or social security organizations require our products to be qualified before procedures performed using our products become eligible for reimbursement. Failure to receive, or delays in the receipt of, relevant foreign qualifications could have a material adverse effect on our business, financial condition and results of operations. Due to the movement toward harmonization of standards in Europe, we expect a changing regulatory environment characterized by a shift from a country-by-country regulatory system to a Europe-wide single regulatory system. We cannot predict the timing of this harmonization and its effect on us. Adapting our business to changing regulatory systems could have a material adverse effect on our business, financial condition, and results of operations. If we fail to comply with applicable foreign regulatory requirements, we may be subject to fines, suspension, or withdrawal of regulatory approvals, product recalls, seizure of products, operating restrictions and criminal prosecution. In addition, we are subject to the U.S. Foreign Corrupt Practices Act, anti-bribery, antitrust and anti-competition laws, and similar laws in foreign countries. Any violation of these laws by our distributors or agents or by us could create a substantial liability for us and also cause a loss of reputation in the market. From time to time, we may face audits or investigations by one or more government agencies, compliance with which could be costly and time-consuming, and could divert our management and key personnel from our business operations. An adverse outcome under any such investigation or audit could subject us to fines or other penalties, which could adversely affect our business and financial results.

While we do not control referrals of health care services or bill directly to Medicare, Medicaid or other third-party payors, many health care laws and regulations apply to our business. We are subject to health care fraud and patient privacy regulation by the federal government, the states in which we conduct our business, and internationally. The regulations that may affect our ability to operate include: - the federal healthcare program Anti-Kickback Statute, which prohibits, among other things, persons from soliciting, receiving or providing remuneration, directly or indirectly, to induce either the referral of an individual, for an item or service or the purchasing or ordering of a good or service, for which payment may be made under federal health care programs such as the Medicare and Medicaid programs;- federal false claims laws which prohibit, among other things, individuals or entities from knowingly presenting, or causing to be presented, claims for payment from Medicare, Medicaid, or other third-party payors that are false or fraudulent, and which may apply to entities like us if we provide coding and billing advice to customers;         - the federal Health Insurance Portability and Accountability Act of 1996, or HIPAA, which prohibits executing a scheme to defraud any health care benefit program or making false statements relating to health care matters and which also imposes certain requirements relating to the privacy, security and transmission of individually identifiable health information; and the applicable Privacy and Security Standards of HITECH, the Health Information Technology for Economic and Clinical Health Act, which is Title XIII of the American Recovery and Reinvestment Act;         - state law equivalents of each of the above federal laws, such as anti-kickback and false claims laws which may apply to items or services reimbursed by any third-party payor, including commercial insurers, and state laws governing the privacy of health information in certain circumstances, many of which differ from each other in significant ways and often are not preempted by HIPAA, thus complicating compliance efforts, including the California Consumer Privacy Act, or CCPA, which is introduces new and far-reaching law data privacy compliance burdens on many organizations doing business in California who collect personal information about California residents;         - the General Data Protection Regulation, or GDPR, which imposes requirements for controllers and processors of personal data and is in effect across the European Economic Area, or EEA, such as imposing higher standards when obtaining consent from individuals to process their personal data, requiring more robust disclosures to individuals, strengthening individual data rights, shortening timelines for data breach notifications, limiting retention periods and secondary use of information, increasing requirements pertaining to health data as well as pseudonymised data, and imposing additional obligations when we contract third-party processors in connection with the processing of personal data;         - federal self-referral laws, such as the Stark Anti-Referral Law, which prohibits a physician from making a referral to a provider of certain health services with which the physician or the physician's family member has a financial interest;         - federal and state Sunshine laws, which require manufacturers of certain medical devices to collect and report information on payments or transfers of value to physicians and teaching hospitals, as well as investment interests held by physicians and their immediate family members; and         - regulations pertaining to receipt of CE mark for our products marketed outside of the United States and submission to periodic regulatory audits in order to maintain these regulatory approvals. If our operations are found to be in violation of any of the laws described above or any other governmental laws or regulations that apply to us, we may be subject to penalties, including civil and criminal penalties, damages, fines, loss of reimbursement for our products under federal or state government health programs such as Medicare and Medicaid and the curtailment or restructuring of our operations. Any penalties, damages, fines, curtailment, or restructuring of our operations could adversely affect our ability to operate our business and our financial results. The risk of our being found in violation of these laws is increased by the fact that many of them have not been fully interpreted by the regulatory authorities or the courts, and their provisions are open to a variety of interpretations. Any action against us for violation of these laws, even if we successfully defend against it, could cause us to incur significant legal expense and divert our management's attention from the operation of our business. Moreover, to achieve compliance with applicable federal and state privacy, security, and electronic transaction laws, we may be required to modify our operations with respect to the handling of patient information. Implementing these modifications may prove costly. At this time, we are not able to determine the full consequences to us, including the total cost of compliance, of these various federal and state laws.

In response to perceived increases in health care costs in recent years, there have been and continues to be proposals by the federal administration, members of Congress, state governments, regulators and third-party payors to control these costs and, more generally, to reform the U.S. healthcare system. Decisions by both the federal and state governments on funding priorities for various healthcare programs impact the finances of our customers on an ongoing and recurring basis. Such decisions may impact purchasing decisions of a customer. Changes to, or repeal of, the 2010 Patient Protection and Affordable Care Act (PPACA), which different administrations and certain members of Congress have affirmatively indicated that they will pursue, could materially and adversely affect our business and financial position, and results of operations. Even if the PPACA is not amended or repealed, the administration could propose changes impacting implementation of the PPACA, which could materially and adversely affect our financial position or operations. However, we cannot currently predict the content, timing or impact that any such future legislation will have on our business.

Some states require health care providers to obtain a certificate of need or similar regulatory approval prior to the acquisition of high-cost capital items such as our products. In many cases, a limited number of these certificates are available. As a result of this limited availability, hospitals and other health care providers may be unable to obtain a certificate of need for the purchase of our systems. Further, the sales and installation cycle of our robotic magnetic navigation systems may be longer in certificate of need states due to the time it takes our customers to obtain the required approvals. In addition, our customers must meet various federal and state regulatory and/or accreditation requirements in order to receive payments from government-sponsored health care programs such as Medicare and Medicaid, receive full reimbursement from third party payors, and maintain their customers. Our international customers may be required to meet similar or other requirements. Any lapse by our customers in maintaining appropriate licensure, certification or accreditation, or the failure of our customers to satisfy the other necessary requirements under government-sponsored health care programs or other requirements could cause our sales to decline.

Our research and development efforts and our marketing strategy depend heavily on obtaining support, physician training assistance, and collaboration from highly regarded physicians at leading commercial and research hospitals, particularly in the U.S. and Europe. If we are unable to gain and/or maintain such support, training services, and collaboration or if the reputation or standing of these physicians is impaired or otherwise adversely affected, our ability to market our products and, as a result, our financial condition, results of operations and cash flow could be materially and adversely affected.

To achieve and grow sales, hospitals must purchase our products, and in particular, our robotic magnetic navigation system. The robotic magnetic navigation system is a novel device, and hospitals and physicians are traditionally slow to adopt new products and treatment practices. In addition, hospitals may delay their purchase or installation decision for the robotic magnetic navigation system based on the disposable interventional devices that have received regulatory clearance or approval. Moreover, the robotic magnetic navigation system is an expensive piece of capital equipment, representing a significant portion of the cost of a new or replacement interventional lab. Although priced significantly below a robotic magnetic navigation system, the Odyssey Solution is still an expensive product. If hospitals do not widely adopt our systems, or if they decide that they are too expensive, we may never become profitable. Any failure to sell as many systems as our business plan requires could also have a seriously detrimental impact on our results of operations, financial condition, and cash flow.

Our backlog, which consists of purchase orders and other commitments, is considered by some investors to be a significant indicator of future performance. Consequently, negative changes to this backlog or its failure to grow commensurate with expectations could negatively impact our future operating results or our share price. Our backlog includes those outstanding purchase orders and other commitments that management believes will result in recognition of revenue upon delivery or installation of our systems. We cannot assure you that we will recognize revenue in any particular period or at all because some of our purchase orders and other commitments are subject to contingencies that are outside our control. In addition, these orders and commitments may be revised, modified or cancelled, either by their express terms, as a result of negotiations or by project changes or delays. System installation is, by its nature, subject to the interventional lab construction or renovation process which comprises multiple stages, all of which are outside of our control. Although the actual installation of our robotic magnetic navigation system requires only a few weeks, and can be accomplished by either our staff or by subcontractors, successful installation of our system can be subjected to delays related to the overall construction or renovation process. If we experience any failures or delays in completing the installation of these systems, our reputation would suffer and we may not be able to sell additional systems. We have experienced situations in which our purchase orders and other commitments did not result in recognizing revenue from placement of a system with a customer. In addition to construction delays, there are risks that an institution will attempt to cancel a purchase order as a result of subsequent project review by the institution or the departure from the institution of physicians or physician groups who have expressed an interest in purchasing our products. Decreases in our backlog have occurred in the past and could occur in the future, causing delays in revenue recognition or even removal of orders and other commitments from our backlog. Such events would have a negative effect on our revenue and results of operations.

We anticipate that our robotic magnetic navigation system will continue to have a lengthy sales cycle because it consists of a relatively expensive piece of capital equipment, the purchase of which requires the approval of senior management at hospitals, inclusion in the hospitals' interventional lab budget process for capital expenditures, and, in some instances, a certificate of need from the state or other regulatory approval. In addition, historically the majority of our products have been delivered less than one year after the receipt of a purchase order from a hospital, with the timing being dependent on the construction cycle for the new or replacement interventional suite in which the equipment will be installed. In some cases, this time frame has been extended further because the interventional suite construction is part of a larger construction project at the customer site (typically the construction of a new building), which may occur with our existing and future purchase orders. We cannot assure you that the time from purchase order to delivery for systems to be delivered in the future will be consistent with our historical experience. Moreover, a global economic slowdown may cause our customers to further delay construction or significant capital purchases, which could further lengthen our sales cycle. This may contribute to substantial fluctuations in our quarterly operating results. As a result, in future quarters our operating results could fall below the expectations of securities analysts or investors, in which event our stock price would likely decrease.

Our products must compete with traditional interventional methods. These methods are widely accepted in the medical community, have a long history of use and do not require the purchase of an additional expensive piece of capital equipment. In addition, many of the medical conditions that can be treated using our products can also be treated with pharmaceuticals or other medical devices and procedures. Many of these alternative treatments are also widely accepted in the medical community and have a long history of use. We also face competition from companies that are developing robotic technologies for electrophysiology and non-electrophysiology interventional procedures. We are aware of three companies that commercialized endovascular catheter navigation systems which have been cleared by the FDA for electrophysiology procedures as well as two companies with electromagnetic catheter navigation systems that received CE Mark approval in Europe. None of these companies seem to be active with any current commercial activities. Outside of electrophysiology, there are at least two companies that have commercialized robotic systems for guidewire manipulation and can be viewed as potential competitors as we look to address additional clinical applications. We face competition from companies that are developing drugs, gene or cellular therapies or other medical devices or procedures to treat the conditions for which our products are intended. The medical device and pharmaceutical industries make significant investments in research and development, and innovation is rapid and continuous. Other companies in the medical device industry continue to develop new devices and technologies for traditional interventional methods. If these or other new products or technologies emerge that provide the same or superior benefits as our products at equal or lesser cost, it could render our products obsolete or unmarketable. In addition, the presence of other competitors may cause potential customers to delay their purchasing decisions, resulting in a longer than expected sales cycle, even if they do not choose our competitors' products. We cannot be certain that physicians will use our products to replace or supplement established treatments or that our products will be competitive with current or future products and technologies. Many of our other competitors also have longer operating histories, significantly greater financial, technical, marketing and other resources, greater name recognition and a larger base of customers than we do. In addition, as the markets for medical devices develop, additional competitors could enter the market. We cannot assure you that we will be able to compete successfully against existing or new competitors. Our revenue would be reduced or eliminated if our competitors develop and market products that are more effective and less expensive than our products.