Leap Therapeutics (LPTX) Risk Factors

We do not manufacture any of our product candidates, and we do not currently plan to develop any capacity to do so. We utilize third-party contract manufacturing organizations ("CMOs"), to manufacture the clinical trial material of DKN-01 and expect to do so for commercial products, if approved. We do not have any long-term commitments from our CMOs for clinical trial material or guaranteed prices for our product candidates. Any delays in obtaining adequate supplies with respect to our product candidates will delay the development or commercialization of our product candidates. Our product candidates compete with other products and product candidates for access to contract manufacturing facilities. There are a limited number of CMOs that operate under cGMP regulations and that are both capable of manufacturing for us and willing to do so. If our existing CMOs, or any new third party CMOs that we engage in the future to manufacture our product candidates for our clinical trials, should cease to continue to do so for any reason, we likely would experience delays in obtaining sufficient quantities of our product candidates for us to advance our clinical trials while we identify and qualify replacement suppliers. We may not succeed in our efforts to establish sufficient manufacturing relationships or other alternative arrangements to meet our needs for any of our existing or future product candidates. If for any reason we are unable to obtain adequate supplies of our product candidates, it will be more difficult for us to conduct clinical trials, develop our product candidates and operate our business. Any problems or delays we experience in preparing for commercial-scale manufacturing of a product candidate or component may result in a delay in FDA approval of the product candidate or may impair our ability to manufacture commercial quantities or such quantities at an acceptable cost, which could result in the delay, prevention, or impairment of clinical development and commercialization of our product candidates and could adversely affect our business. The manufacture of pharmaceutical products requires significant expertise and capital investment, including the development of advanced manufacturing techniques and process controls. Manufacturers of therapeutics often encounter difficulties in production, particularly in scaling up initial production, including difficulties with production costs and yields, quality control, (including stability of the product candidate and quality assurance testing), shortages of qualified personnel, and compliance with strictly enforced federal, state, and foreign regulations. Our CMOs may not perform as agreed or may have a failure of a manufacturing campaign. Any changes or deviations in a manufacturing process may result in the failure of the product to meet the necessary specifications. If our CMOs were to encounter any of these difficulties, our ability to provide product candidates to patients in our clinical trials and for commercial use, if approved, could be jeopardized. Reliance on third-party CMOs entails exposure to risks to which we would not be subject if we manufactured the product candidate ourselves, including: - reduced day-to-day control over the manufacturing process for our product candidates as a result of using third-party CMOs for all aspects of manufacturing activities;- reduced control over the protection of our trade secrets and know-how from misappropriation or inadvertent disclosure;- termination or nonrenewal of manufacturing agreements with third parties in a manner or at a time that may be costly or damaging to us or result in delays in the development or commercialization of our product candidates; and - disruptions to the operations of our third-party CMOs caused by conditions unrelated to our business or operations, which could result in disruptions in the development or commercialization of our product candidates. In addition, all CMOs of our product candidates and therapeutic substances must comply with cGMP requirements enforced by the FDA that are applicable to both finished products and their active components used both for clinical and commercial supply, through its facilities inspection program. Our CMOs must be approved by the FDA pursuant to inspections that will be conducted after we submit our marketing applications to the agency. Our CMOs will also be subject to continuing FDA and other regulatory authority inspections should we receive marketing approval. Further, we, in cooperation with our CMOs, must supply all necessary chemistry, manufacturing, and control documentation in support of a BLA on a timely basis. The cGMP requirements include quality control, quality assurance, and the maintenance of records and documentation. Manufacturers of our product candidates and therapeutic substances may be unable to comply with our specifications, these cGMP requirements and with other FDA, state, and foreign regulatory requirements. Poor control of production processes can lead to the introduction of adventitious agents or other contaminants, or to inadvertent changes in the properties or stability of product candidates that may not be detectable in final product testing. If our CMOs cannot successfully manufacture material that conforms to our specifications and the strict regulatory requirements of the FDA or other regulatory authorities, they may not be able to secure or maintain regulatory approval for their manufacturing facilities. Any such deviations may also require remedial measures that may be costly and/or time-consuming for us or a third party to implement and that may include the temporary or permanent suspension of a clinical trial or commercial sales or the temporary or permanent closure of a facility. Any such remedial measures imposed upon us or third parties with whom we contract could materially harm our business. While we are ultimately responsible for the manufacture of our product candidates and therapeutic substances, other than through our contractual arrangements, we have little control over our CMOs' compliance with these regulations and standards. If the FDA or a comparable foreign regulatory authority does not approve these facilities for the manufacture of our product candidates or if it withdraws any such approval in the future, we may need to find alternative manufacturing facilities, which could significantly impact our ability to develop, obtain regulatory approval for or market our product candidates, if approved. A failure to comply with these requirements may also result in regulatory enforcement actions against our CMOs or us, including fines and civil and criminal penalties. If the safety of any quantities supplied is compromised due to our CMOs' failure to adhere to applicable laws or for other reasons, we may not be able to obtain regulatory approval for or successfully commercialize our product candidates. Any failure or refusal to supply sufficient quantities of our product candidates could delay, prevent or impair our clinical development or commercialization efforts. Any change in our CMOs could be costly because the commercial terms of any new arrangements could be less favorable than our existing arrangements and because the expenses relating to the transfer of necessary technology and processes could be significant, as there are significant regulatory requirements which must be met prior to receiving FDA approval for the transfer of a manufacturing process for a therapeutic antibody product to a new manufacturing facility. We also rely on third parties to store and distribute our product candidates for the clinical trials that we conduct. Any performance failure on the part of our distributors could delay clinical development of our product candidates, which could produce additional losses.

We rely on CROs to conduct, supervise, and monitor our preclinical and clinical trials for our product candidates. We expect to continue to rely on third parties, such as CROs, clinical data management organizations, medical institutions, and clinical investigators, to conduct our preclinical studies and clinical trials. While we have agreements governing their activities, we have limited influence over their actual performance and control only certain aspects of their activities. The failure of these third parties to successfully carry out their contractual duties or meet expected deadlines could substantially harm our business, because we may be delayed in completing or unable to complete the clinical trials required to support future approval of our product candidates, and we may not obtain marketing approval for or commercialize our product candidates in a timely manner or at all. Moreover, these agreements might terminate for a variety of reasons, including a failure to perform by such third parties. If we need to enter into alternative arrangements, our product development activities could be delayed, which could adversely affect our business. Our reliance on these third parties for development activities reduces our control over these activities. Nevertheless, we are responsible for ensuring that each of our studies is conducted in accordance with applicable protocols, legal, regulatory, and scientific standards, and our reliance on CROs does not relieve us of our regulatory responsibilities. For example, we will remain responsible for ensuring that each of our clinical trials is conducted in accordance with the general investigational plan and applicable protocols for that trial and for ensuring that our preclinical trials are conducted in accordance with Good Laboratory Practice Standards ("GLPs"), as appropriate. Moreover, the FDA and comparable foreign regulatory authorities require us to comply with Good Clinical Practices, commonly referred to as GCPs, for conducting, recording, and reporting the results of clinical trials to assure that data and reported results are credible and accurate and that the rights, integrity, and confidentiality of trial participants are protected. Regulatory authorities enforce these requirements through periodic inspections of trial sponsors, clinical investigators, and trial sites. If we or any of our CROs fail to comply with applicable GCPs or other regulatory requirements, we or our CROs may be subject to enforcement or other legal actions, the clinical data generated in our clinical trials may be deemed unreliable and the FDA or comparable foreign regulatory authorities may require us to perform additional clinical trials. If any of our relationships with these third-party CROs terminate, we may not be able to enter into arrangements with alternative CROs or to do so on commercially reasonable terms. Switching or adding additional CROs involves additional cost and requires management time and focus. In addition, there is a natural transition period when a new CRO commences work. As a result, delays could occur, which could compromise our ability to meet our desired development timelines. Although we carefully manage our relationships with our CROs, there can be no assurance that we will not encounter similar challenges or delays in the future or that these delays or challenges will not have a material adverse impact on our business, financial condition and prospects, and results of operations.

As part of our collaboration with BeiGene, we rely on BeiGene to supply tislelizumab for the DisTinGuish trial and will have limited influence over their performance. The failure of BeiGene to supply tislelizumab for the DisTinGuish trial could substantially harm our ability to complete the DisTinGuish trial which could delay our DKN-01 development activities and adversely affect our business.

As a biopharmaceutical company, we are subject to many federal and state healthcare laws in the United States and healthcare and data protection laws around the world. If we or our operations are found to be in violation of any federal or state healthcare law, global general data protection laws, or any other governmental regulations that apply to us, we may be subject to penalties, including civil, criminal, or administrative penalties, damages, fines, disgorgement, debarment from government contracts and/or refusal of orders under existing contracts, exclusion from participation in U.S. federal or state health care programs, corporate integrity agreements, or the curtailment or restructuring of our operations, any of which could materially adversely affect our ability to operate our business and our financial results. If any of the physicians or other healthcare providers or entities with whom we expect to do business, including our collaborators, is found not to be in compliance with applicable laws, they may be subject to criminal, civil or administrative sanctions, including but not limited to, exclusions from participation in government healthcare programs, which could also materially adversely affect our business. Although an effective compliance program can mitigate the risks of investigation and prosecution for violations of these laws, these risks cannot be entirely eliminated. Moreover, achieving and sustaining compliance with applicable privacy, security, and fraud laws may prove to be costly. Any action against us for violation of these laws, even if we successfully defend against it, could cause us to incur significant legal expenses and divert our management's attention from the operation of our business.

Because we are at the early stages of the clinical and regulatory development of our product candidates, the time required to obtain approval for them from the FDA and comparable foreign authorities is unpredictable but typically takes many years following the commencement of clinical trials and depends upon numerous factors, including the substantial discretion of such regulatory authorities. In addition, approval policies, regulations, or the type and amount of clinical data necessary to gain approval may change during the course of a product candidate's clinical development and may vary among jurisdictions. Any such change may require us to amend our clinical trial protocols, conduct additional studies that require regulatory or IRB approval, or otherwise cause delays in the approval or rejection of an application. We have not obtained regulatory approval for any product candidate and it is possible that none of our existing product candidates or any product candidates we may seek to develop in the future will ever obtain regulatory approval. Moreover, we have only completed single-arm, uncontrolled studies for DKN-01, and FL-301 is in its first-in-human clinical trial. Both DKN-01 and FL-301 will require additional preclinical and clinical development, as well as additional manufacturing development before we will be able to submit a marketing application to the FDA. Moreover, should the FDA determine that a companion diagnostic device is required for use of our product candidates or should we decide to pursue the development of a companion diagnostic device for the use of our product candidates, further development work would be required for such a device, including, possibly the approval of an Investigational Device Exemption for the study of such a device from the FDA, compliance with the FDA's device regulations, and either FDA clearance or approval of the device for commercial use. Such development would require additional time and expense and be subject to the risk of FDA non-approval or clearance of the diagnostic. Any delay in obtaining or failure to obtain required approvals could materially adversely affect our ability or the ability of any of our future collaborators to generate revenue from the particular product candidate, which could result in significant harm to our financial position and adversely impact our stock price. Our product candidates and the activities associated with their development and commercialization, including their design, testing, manufacture, safety, efficacy, recordkeeping, labeling, storage, approval, advertising, marketing, promotion, sale, and distribution, are subject to comprehensive regulation by the FDA and other regulatory agencies in the United States and by the European Medicines Agency ("EMA"), and similar regulatory authorities outside the United States and Europe. Failure to obtain marketing approval for a product candidate will prevent us from commercializing that product candidate. We have no experience in filing and supporting the applications necessary to gain marketing approvals and expect to rely on CROs and consultants to assist us in this process. Securing marketing approval requires the submission of extensive preclinical and clinical data and supporting information to regulatory authorities for each therapeutic indication to establish the product candidate's safety, purity, and potency for that indication. Securing marketing approval also requires the submission of information about the product manufacturing process to, and inspection of manufacturing facilities and clinical trial sites by, the relevant regulatory authorities. We may also experience numerous unforeseen events during, or as a result of, clinical trials that could delay or prevent our ability to receive marketing approval or commercialize our product candidates, including: - regulators or IRBs may not authorize us or our investigators to commence a clinical trial or to conduct a clinical trial at a prospective trial site, we may fail to reach an agreement with regulators or IRBs regarding the scope, design, or implementation of our clinical trials or regulators or IRBs may require that we modify or amend our clinical trial protocols;- our third-party contractors may fail to comply with regulatory requirements, standard operating procedures or clinical trial protocols, or fail to meet their contractual obligations to us in a timely manner, or at all, or we may be required to engage in additional clinical trial site monitoring or manufacturing activities;- we, relevant regulators, or IRBs may require the suspension or termination of clinical research for various reasons, including noncompliance with regulatory requirements or a finding that participants are being exposed to unacceptable health risks, undesirable side effects, or other unexpected characteristics of a product candidate, or due to findings of undesirable effects caused by a chemically or mechanistically similar therapeutic or therapeutic candidate;- changes in or the enactment of additional statutes or regulations;- there may be changes in marketing approval or regulatory review policies during the development period rendering our data insufficient to obtain marketing approval;- we may decide, or regulators may require us, to conduct additional clinical trials, analyses, reports, data, or preclinical trials, or we may abandon product development programs;- there may be regulatory questions or disagreements regarding interpretations of data and results, or new information may emerge regarding our product candidates, the FDA or comparable foreign regulatory authorities may disagree with our study design or our interpretation of data from preclinical studies and clinical trials or find that a product candidate's benefits do not outweigh its safety risks;- the FDA or comparable foreign regulatory authorities may disagree with our intended indications;- the FDA or comparable foreign regulatory authorities may fail to approve or subsequently find fault with our manufacturing processes or our manufacturing facilities for clinical and future commercial supplies;- the data collected from clinical trials of our product candidates or any additional product candidate may not be sufficient to cause the FDA or comparable foreign regulatory authorities to support the submission of a BLA, or other comparable submission in foreign jurisdictions or to obtain regulatory approval in the United States or elsewhere; and - the FDA or comparable foreign regulatory authorities may take longer than we anticipate to make a decision on our product candidates. Regulatory authorities have substantial discretion in the approval process and may refuse to accept any application. In addition, varying interpretations of the data obtained from preclinical and clinical testing could delay, limit or prevent marketing approval of a product candidate. The number and types of preclinical studies and clinical trials that will be required for regulatory approval also varies depending on the product candidate, the disease or condition that the product candidate is designed to address, and the regulations applicable to any particular product candidate. Approval policies, regulations or the type and amount of clinical data necessary to gain approval may change during the course of a product candidate's clinical development and may vary among jurisdictions, which may cause delays or limitations in the approval of or the decision not to approve an application. It is possible that neither of our clinical stage product candidates, DKN-01 and FL-301, nor any product candidates we may seek to develop in the future will ever obtain the appropriate regulatory approvals necessary for us or any future collaborators to commence product sales. Finally, even if we were to obtain approval, regulatory authorities may approve any of our product candidates for fewer or more limited indications or uses than we request, may require significant safety warnings, including black box warnings, contraindications, and precautions, may grant approval contingent on the performance of costly post-marketing clinical trials, surveillance, or other requirements, including risk evaluation and mitigation strategies ("REMS"), to monitor the safety or efficacy of the product, or may approve a product candidate with a label that does not include the labeling claims necessary or desirable for the successful commercialization of that product candidate. Any of these scenarios could compromise the commercial prospects for our product candidates. If we experience delays in obtaining approval, if we fail to obtain approval of a product candidate or if the label for a product candidate does not include the labeling claims necessary or desirable for the successful commercialization of that product candidate, the commercial prospects for such product candidate may be harmed and our ability to generate revenues from that product candidate could be materially impaired.