Fuelcell Energy (FCEL) Risk Factors

We develop complex and evolving products and we continue to advance the capabilities of our fuel cell stacks. We produce carbonate fuel stacks with a 7-year cell design life. We are also in the process of manufacturing and selling SOEC and SOFC products. We provide product warranties for a specific period of time against manufacturing or performance defects. We accrue for warranty costs based on historical warranty claim experience; however, actual future warranty expenses may be greater than we have assumed in our estimates. Issues have been and may continue to be found in existing or new products including, but not limited to, module decay rates which have exceeded and may continue to exceed design expectations. This has resulted and may continue to result in a delay in recognition or loss of revenues and may result in loss of market share or failure to achieve broad market acceptance. The occurrence of defects has also caused and may continue to cause us to incur significant warranty, support and repair costs in excess of our estimates, could divert the attention of our engineering personnel from our product development efforts, and could harm our relationships with our customers. Although we seek to limit our liability, a product liability claim brought against us, even if unsuccessful, would likely be time consuming, could be costly to defend, and may hurt our reputation in the marketplace. Our customers could also seek and obtain damages from us for their losses.

We use various raw materials and components to construct a fuel cell module, including nickel and stainless steel that are critical to our manufacturing process. We also rely on third-party suppliers for the BOP components in our products. Suppliers must undergo a qualification process, which takes four to twelve months. We continually evaluate new suppliers, and we are currently qualifying several new suppliers. There are a limited number of suppliers for some of the key components of our products. In addition, to the extent the processes that our suppliers use to manufacture components are proprietary, we may be unable to obtain comparable components from alternative suppliers, all of which could harm our business prospects, results of operations and financial condition. We do not know whether we will be able to maintain long-term supply relationships with our critical suppliers, or secure new long-term supply relationships on terms that will allow us to achieve our objectives, if at all. A supplier's failure to develop and supply components in a timely manner or to supply components that meet our quality, quantity or cost requirements or our technical specifications, or our inability to obtain alternative sources of these components on a timely basis or on terms acceptable to us, could each harm our ability to manufacture our products.  In addition, our supply chain was adversely affected by the COVID-19 pandemic, and in the future could be adversely affected by pandemics or other widespread adverse public health events, which may create global shipping and logistics challenges. These challenges may include extended shipping lead times and pricing pressures on transportation and logistics that could adversely impact our ability to meet our production schedules and project deadlines, may result in additional and increased costs, or may otherwise adversely impact our business, results of operations and financial condition. If such events occur and we are unable to pass these costs on to our customers or timely complete projects, we may experience reduced revenue and other adverse impacts on our business, results of operations and financial condition.

Government agencies, such as the Defense Contract Audit Agency, routinely audit and investigate government contractors. These agencies review a contractor's performance under its contracts, cost structure, and compliance with applicable laws, regulations, and standards. If the agencies determine through these audits or reviews that we improperly allocated costs to specific contracts, they will not reimburse us for these costs. Therefore, an audit could result in adjustments to our revenue and costs. Further, although we have internal controls in place to oversee our government contracts, no assurance can be given that these controls are sufficient to prevent isolated violations of applicable laws, regulations and standards. If the agencies determine that we or one of our subcontractors engaged in improper conduct, we may be subject to civil or criminal penalties and administrative sanctions, payments, fines, and suspension or prohibition from doing business with the government, any of which could materially affect our results of operations and financial condition.

We are subject to various federal, state and local laws and regulations relating to, among other things, land use, safe working conditions, handling and disposal of hazardous and potentially hazardous substances and emissions of carbon dioxide and pollutants into the atmosphere. Our business exposes us to the risk of harmful substances escaping into the environment, resulting in personal injury or loss of life, damage to or destruction of property, and natural resource damage. Depending on the nature of the claim, our current insurance policies may not adequately reimburse us for costs incurred in settling environmental damage claims, and in some instances, we may not be reimbursed at all. In addition, it is possible that industry-specific laws and regulations will be adopted covering matters such as transmission scheduling, distribution, emissions, and the characteristics and quality of our products, including installation and servicing. These regulations could limit the growth in the use of carbonate fuel cell products, decrease the acceptance of fuel cells as a commercial product and increase our costs and, therefore, the price of our products. We believe that our businesses are operating in compliance in all material respects with applicable environmental laws; however, these laws and regulations have changed frequently in the past and it is reasonable to expect additional and more stringent changes in the future. Accordingly, compliance with existing or future laws and regulations could have a material adverse effect on our business prospects, results of operations and financial condition. If we fail to comply with applicable environmental laws and regulations, governmental authorities may seek to impose fines and penalties on us or to revoke or deny the issuance or renewal of operating permits and private parties may seek damages from us. Under those circumstances, we might be required to curtail or cease operations, conduct site remediation or other corrective action, or pay substantial damage claims. Given that some of our product configurations run on fossil fuels, we may be negatively impacted by CO2-related changes in applicable laws, regulations, ordinances, rules or the requirements of the incentive programs on which we and our customers currently rely. Changes in any of the laws, regulations, ordinances or rules that apply to our installations and new technology could make it illegal or more costly for us or our customers to install and operate our products at particular sites. Additionally, our customers and potential customers' energy procurement policies may prohibit or limit their willingness to procure our products. Our business prospects may be negatively impacted if we are prevented from completing new installations or our installations become more costly as a result of laws, regulations, ordinances, or rules applicable to our products, or by our customers' and potential customers' energy procurement policies. In addition, certain of our products benefit from federal, state and local governmental incentives, mandates or other programs promoting clean energy generation. Any changes to or termination of these programs could reduce demand for our products, impair sales financing, and adversely impact our business, financial condition and results of operations.

Our plans are dependent upon market acceptance of, as well as enhancements to, our products. Fuel cell systems represent an emerging market, and we cannot be sure that potential customers will accept fuel cells as a replacement for traditional power sources or non-fuel based power sources, hydrogen generation sources or storage. As is typical in a rapidly evolving industry, demand and market acceptance for recently introduced products and services are subject to a high level of uncertainty and risk. Since the distributed generation, hydrogen, carbon capture and storage markets are still evolving, it is difficult to predict with certainty the size of these markets and their growth rates. The development of a market for our products may be affected by many factors that are out of our control, including: - the cost competitiveness of our fuel cell products including availability and output expectations and total cost of ownership;- the future costs of natural gas, renewable natural gas (biofuels), and other fuels used by our fuel cell products;- customer reluctance to try a new product;- the market for distributed generation, hydrogen, carbon capture and storage and government policies that affect those markets;- government incentives, mandates or other programs favoring zero carbon energy sources;- local permitting and environmental requirements;- customer preference for non-fuel based technologies; and - the emergence of newer, more competitive technologies and products. If a sufficient market fails to develop or develops more slowly than we anticipate, we may be unable to recover the losses we will have incurred in the development of our products, and we may never achieve profitability.

We expect a significant portion of the business that we will seek in the foreseeable future will be awarded through competitive bidding against other fuel cell technologies and other forms of power generation. The competitive bidding process involves substantial costs and a number of risks, including the significant cost and managerial time to prepare bids and proposals for contracts that may not be awarded to us and our failure to accurately estimate the resources and costs that will be required to fulfill any contract we win. In addition, following a contract award, we may encounter significant expense, delay or contract modifications or award revocation as a result of our competitors protesting or challenging contracts awarded to us in competitive bidding. Our failure to compete effectively in this procurement environment could adversely affect our revenue and/or profitability. Some of the project awards we receive and orders we accept from customers require certain conditions or contingencies (such as permitting, interconnection, financing or regulatory approval) to be satisfied, some of which are outside of our control. Certain awards are cancelable or revocable at any time prior to contract execution. The time periods from receipt of an award to execution of a contract, or receipt of a contract to installation may vary widely and are determined by a number of factors, including the terms of the award, governmental policies or regulations that go into effect after the award, the terms of the customer contract and the customer's site requirements. These same or similar conditions and contingencies may be required by financiers in order to draw on financing to complete a project. If these conditions or contingencies are not satisfied, or changes in laws affecting project awards occur, or awards are revoked or cancelled, project awards may not convert to contracts, and installations may be delayed or canceled. This could have an adverse impact on our revenue and cash flow and our ability to complete construction of a project.

Failure to protect our existing intellectual property rights may result in the loss of our exclusivity or the right to use our technologies. If we do not adequately ensure our freedom to use certain technology, we may have to pay others for rights to use their intellectual property, pay damages for infringement, misappropriation, or other violation, or be enjoined from using such intellectual property. We rely on patent, trade secret, trademark and copyright law to protect our intellectual property. We previously licensed certain of our carbonate fuel cell manufacturing intellectual property to POSCO Energy on an exclusive basis in the South Korean and broader Asian markets, and pursuant to the terms of the Settlement Agreement with POSCO Energy, we have done so again, but this time on a limited, non-exclusive basis to enable module replacement to POSCO Energy's existing LTSA customers only. In addition, effective as of June 11, 2019, we entered into a license agreement with EMTEC to facilitate the further development of our carbon capture platform (the "EMTEC License Agreement"). Pursuant to the EMTEC License Agreement, we granted EMTEC and its affiliates a non-exclusive, worldwide, fully-paid, perpetual, irrevocable, non-transferable license and right to use our patents filed on or before April 30, 2021, and any data, know-how, improvements, equipment designs, methods, processes and the like provided directly by us or our affiliates to EMTEC or its affiliates under any agreement or otherwise, on or before April 30, 2021, to the extent it is useful to research, develop and commercially exploit carbonate fuel cells in applications in which the fuel cells concentrate carbon dioxide from external industrial and power sources and for any other purpose attendant thereto or associated therewith. Such right and license is sublicensable to third parties performing work for or with EMTEC or its affiliates, but is not otherwise sublicensable. Furthermore, on November 5, 2019, we entered into the EMTEC Joint Development Agreement, pursuant to which we agreed to grant EMTEC and its affiliates a worldwide, non-exclusive, royalty-free, irrevocable, perpetual, sub-licensable, non-transferable (subject to certain exceptions) right and license to practice certain Company background intellectual property (to the extent not already licensed pursuant to  the EMTEC License Agreement) for new carbonate fuel cell technology in carbon capture applications and hydrogen applications. We depend on POSCO Energy and EMTEC to also protect our intellectual property rights, but we cannot assure you that POSCO Energy or EMTEC will do so. As of October 31, 2024, we (excluding our subsidiaries) had 148 U.S. patents and 307 patents in other jurisdictions covering our fuel cell technology (in certain cases covering the same technology in multiple jurisdictions), with patents directed to various aspects of our carbonate technology, SOFC technology, PEM fuel cell technology and applications thereof. As of October 31, 2024, we also had 28 patent applications pending in the U.S. and 86 patent applications pending in other jurisdictions.  As of October 31, 2024, our subsidiary, Versa Power Systems, Ltd. ("Versa"), had 19 U.S. patents and 68 international patents covering SOFC technology (in certain cases covering the same technology in multiple jurisdictions). As of October 31, 2024, Versa also had 13 pending U.S. patent applications and 30 patent applications pending in other jurisdictions. In addition, as of October 31, 2024, our subsidiary, FuelCell Energy Solutions, GmbH, had license rights to 2 U.S. patents and 7 patents outside the U.S. (in certain cases covering the same technology in multiple jurisdictions) for carbonate fuel cell technology licensed from Fraunhofer IKTS. Some of our intellectual property is not covered by any patent or patent application and includes trade secrets and other confidential and/or proprietary know-how, particularly as it relates to our manufacturing processes and engineering design. In addition, some of our intellectual property includes technologies and processes that may be similar to the patented technologies and processes of third parties. If we are found to be infringing, misappropriating or otherwise violating third-party intellectual property, we do not know whether we will be able to obtain licenses to use such intellectual property on acceptable terms, if at all. Our patent position is subject to complex factual and legal issues that may give rise to uncertainty as to the validity, scope, and enforceability of a particular patent. We cannot assure you that any of the U.S. or international patents owned by us (including our subsidiaries) or other patents that third parties license to us will not be invalidated, circumvented, challenged, rendered unenforceable or licensed to others, or that any of our owned or licensed pending or future patent applications will be issued with the breadth of claim coverage sought by us or our licensors, if issued at all. In addition, effective patent, trademark, copyright and trade secret protection may be unavailable, limited or not applied for in certain foreign countries. We also seek to protect our proprietary intellectual property, including intellectual property that may not be patented or able to be patented, in part by confidentiality agreements and, if applicable, inventors' rights agreements with our subcontractors, vendors, suppliers, consultants, strategic business associates and employees. We cannot assure you that these agreements will not be breached, that we will have adequate remedies for any breach or that such persons or institutions will not assert rights to intellectual property arising out of these relationships. Certain of our intellectual property has been licensed to us on a non-exclusive basis from third parties that may also license such intellectual property to others, including our competitors. If our licensors are found to be infringing, misappropriating or otherwise violating third-party intellectual property, we do not know whether we will be able to obtain licenses to use the intellectual property licensed to us on acceptable terms, if at all. If necessary or desirable, we may seek extensions of existing licenses or further licenses under the patents or other intellectual property rights of others. However, we can give no assurances that we will obtain such extensions or further licenses or that the terms of any offered licenses will be acceptable to us. The failure to obtain a license from a third party for intellectual property that we use at present could cause us to incur substantial liabilities, and to suspend the manufacture or shipment of products or our use of processes requiring the use of that intellectual property. While we are not currently engaged in any material intellectual property litigation, we could become subject to lawsuits in which it is alleged that we have infringed, misappropriated or otherwise violated the intellectual property rights of others or commence lawsuits against others who we believe are infringing, misappropriating or otherwise violating our rights or violating their agreements to protect our intellectual property. Our involvement in intellectual property litigation could result in significant expense to us, adversely affecting the development of sales of the challenged product or intellectual property and diverting the efforts of our technical and management personnel, whether or not that litigation is resolved in our favor.

Economic and political events in 2023 and 2024 have altered the landscape in which we and other U.S. companies operate in a variety of ways. In response to inflationary pressures, the U.S. Federal Reserve has raised interest rates, resulting in an increase in the cost of borrowing for us, our customers, our suppliers, and other companies relying on debt financing. World events, such as the Russian invasion of Ukraine and the resulting economic sanctions, have impacted the global economy. Prolonged inflationary conditions, high and/or increased interest rates, and additional sanctions or retaliatory measures related to the Russia-Ukraine crisis, or other geo-political situations, could further negatively affect U.S. and international commerce and exacerbate or prolong the period of high energy prices and supply chain constraints. At this time, the extent and duration of these economic and political events and their effects on the economy and the Company are impossible to predict.