Myers Industries (MYE) Risk Factors

Our operations are subject to federal, state, local and foreign environmental laws and regulations that impose limitations on the discharge of pollutants into the air and water and establish standards for the handling, use, treatment, storage and disposal of, or exposure to, hazardous wastes and other materials and require clean-up of contaminated sites. Some of these laws and regulations require us to obtain permits, which contain terms and conditions that impose limitations on our ability to emit and discharge hazardous materials into the environment and periodically may be subject to modification, renewal and revocation by issuing authorities. Fines, penalties and other civil or criminal sanctions may be imposed for non-compliance with applicable environmental laws and regulations and the failure to have or to comply with the terms and conditions of required permits. Certain environmental laws in the United States, such as the federal Comprehensive Environmental Response, Compensation and Liability act of 1980, as amended, 42 U.S.C. §§ 9601 et seq. ("CERCLA" or "Superfund law") and similar state laws, impose liability for the cost of investigation or remediation of contaminated sites upon the current or, in some cases, the former site owners or operators (or their predecessor entities) and upon parties who arranged for the disposal of wastes or transported or sent those wastes to an off-site facility for treatment or disposal, regardless of when the release of hazardous substances occurred or the lawfulness of the activities giving rise to the release. Such liability can be imposed without regard to fault and, under certain circumstances, can be joint and several, resulting in one party being held responsible for the entire obligation. While we have not been required historically to make significant capital expenditures in order to comply with applicable environmental laws and regulations, we cannot predict with any certainty our future capital expenditure requirements because of continually changing compliance standards and environmental technology. Furthermore, violations or contaminated sites that we do not know about, including contamination caused by prior owners and operators of such sites, or at sites formerly owned or operated by us or our predecessors in connection with discontinued operations, could result in additional compliance or remediation costs or other liabilities, which could be material. As more fully described in Note 9 to the consolidated financial statements, we are a potentially responsible party ("PRP") in an environmental proceeding and remediation matter in which substantial amounts may be involved. It is possible that adjustments to reserved expenses will be necessary as new information is obtained, including after finalization and EPA approval of the work plan for the remedial investigation and feasibility study ("RI/FS"). Estimates of Buckhorn's environmental liabilities are based on current facts, laws, regulations and technology. Estimates of Buckhorn's environmental liabilities are further subject to uncertainties regarding the nature and extent of site contamination, the range of remediation alternatives available, evolving remediation standards, imprecise engineering evaluation and cost estimates, the extent of remedial actions that may be required, the extent of oversight by the EPA and the number and financial condition of other PRPs that may be named, as well as the extent of their responsibility for the remediation. At this time, we have not accrued for such remediation costs as we are unable to estimate the liability at this time. Additionally, we are party to a consent decree regarding another location pursuant to which we are required to contribute to the costs of the remediation project. We have limited insurance coverage for potential environmental liabilities associated with historic and current operations and we do not anticipate increasing such coverage in the future. We may also assume significant environmental liabilities in acquisitions. Such costs or liabilities could adversely affect our financial situation and our ability to conduct our business.

Our ability to manage our cost structure can be adversely affected by movements in commodity and other raw material prices. Our primary raw materials include plastic resins, colorants, steel and natural and synthetic rubbers. Plastic resins in particular are subject to substantial short-term price fluctuations, including those arising from supply shortages and changes in the prices of natural gas, crude oil and other petrochemical intermediates from which resins are produced, as well as other factors such as production interruption created by extreme weather conditions or other conditions outside of our control. The Company's revenue and profitability may be materially and adversely affected by these price fluctuations. Market conditions may limit our ability to raise selling prices to offset increases in our raw material input costs. If we are unsuccessful in developing ways to mitigate raw material cost increases, we may not be able to improve productivity or realize our ongoing cost reduction programs sufficiently to help offset the impact of these increased raw material costs. As a result, higher raw material costs could result in declining margins and operating results. Raw material availability is subject to the risk of our suppliers' ability to supply products to us, which could be affected by the suppliers' ability to produce and deliver raw materials due to material or labor shortages or labor disputes or strikes. Changes in raw material availability may also occur due to events beyond our control, including natural disasters such as floods, tornadoes, hurricanes and other extreme weather conditions. Our specific molding technologies and/or product specifications can limit our ability to timely locate alternative suppliers to produce certain products. This can occur when there are limited suppliers of certain grades of plastic resins, where the market supply can be temporarily disrupted by an unanticipated loss of capacity from any one such supplier. In some instances, we rely on a limited number of key suppliers to manufacture custom made components for certain of our products using proprietary molds that we own. We have not and do not expect disruption from these key suppliers, and our sourcing team has taken measures to mitigate this risk. However, if suppliers of these custom made components are unable to meet our requirements, fail to make shipments in a timely manner, or ship defective components, we could experience a shortage or delay in supply or fail to meet our customers' demand, which could adversely affect our financial condition and results of operations. Changes in trade policies could result in new tariffs or other restrictions on products, components or raw materials sourced, directly or indirectly, from foreign countries, which could increase raw material costs and adversely impact profitability. However, as the Company has limited foreign operations and sources much of its raw materials domestically, we do not believe new tariffs would have a material impact on our operations. We also believe that adverse impacts can be mitigated over time through increases in price or sourcing through an alternate supply chain.

We operate in a wide range of regions, primarily in North America. Additionally, some of our end markets are cyclical, and some of our products are a capital expense for our customers. Worldwide and regional business and political conditions and overall strength of the worldwide, regional and local economies, including changes in the economic conditions of the broader markets and in our individual niche markets, could have an adverse effect on one or both of our operating segments. Inflationary economic conditions in North America and the other regions in which we operate could adversely impact the cost of labor, and commodity and other raw material prices. Market conditions may limit our ability to raise selling prices to offset increased costs and prices caused by inflation. To the extent we are not able to offset increased costs and prices caused by inflation we may not be able to maintain current margins and operating results.