Meta Materials (MMATQ) Risk Factors

If our technology is used in defective or malfunctioning products, we could be sued for damages, especially if the defect or malfunction causes physical harm to people. While we will endeavor to carry product liability insurance, contractually limit our liability and obtain indemnities from our customers, there can be no assurance that we will be able to obtain insurance at satisfactory rates or in adequate amounts or that any insurance and customer indemnities will be adequate to defend against or satisfy any claims made against us. The costs associated with legal proceedings are typically high, relatively unpredictable and not completely within our control. Even if we consider any such claim to be without merit, significant contingencies may exist, similar to those summarized in the above risk factor concerning intellectual property litigation, which could lead us to settle the claim rather than incur the cost of defense and the possibility of an adverse judgment. Product liability claims in the future, regardless of their ultimate outcome, could have a material adverse effect on our business, financial condition and reputation, and on our ability to attract and retain customers.

The semiconductor industry has been characterized by periodic limitations on production capacity. These limitations may result in longer lead times for product delivery than desired by many of our customers. If we are unable to increase our production capacity to meet future demand, some of our customers may seek other sources of supply, our future growth may be limited, or our results of operations may be adversely affected.

We believe that semiconductor components are subject to shorter product life cycles, because of technological change, consumer preferences, trendiness and other factors, than other types of products sold by our customers. Shorter product life cycles result in more frequent design competitions for the inclusion of semiconductors in next-generation consumer products, which may not result in design wins for us. Shorter product life cycles may lead to more frequent circumstances where sales of our existing products are reduced or ended.

Our management has spent, and continues to be required to spend, a significant amount of time and effort focusing on the Realignment and Consolidation Plan. This diversion of attention may have an adverse effect on the conduct of our business, and, as a result, on our financial condition and results of operations, particularly if the Realignment and Consolidation Plan is protracted. During the pendency of the Realignment and Consolidation Plan, our employees may face considerable distraction and uncertainty and we may experience increased levels of employee attrition. A loss of key personnel or material erosion of employee morale could have a materially adverse effect on our ability to meet customer expectations, thereby adversely affecting our business and results of operations. The failure to retain or attract members of our management team and other key personnel could impair our ability to execute our strategy and implement operational initiatives, thereby having a material adverse effect on our financial condition and results of operations. Likewise, we could experience losses of customers who may be concerned about our ongoing long-term viability.

We are exposed to the risk that our employees, consultants, and other commercial partners and business associates may engage in fraudulent or illegal activity. Misconduct by these parties could include intentional, reckless, or negligent conduct or other unauthorized activities that violate various regulations (both domestic and foreign), including those laws requiring the reporting of true, complete, and accurate information to such regulators, manufacturing standards, healthcare fraud and abuse laws, and regulations in the United States and internationally or laws that require the true, complete, and accurate reporting of financial information or data. In particular, sales, marketing, and business arrangements are subject to extensive laws and regulations intended to prevent fraud, misconduct, kickbacks, self-dealing, and other abusive practices. These laws and regulations may restrict or prohibit a wide range of pricing, discounting, marketing and promotion, sales commission, customer incentive programs, and other business arrangements. It is not always possible to identify and deter misconduct by our employees, consultants, and other third parties, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to comply with these laws or regulations. If any such actions are instituted against us and we are not successful in defending ourselves or asserting our rights, those actions could result in the imposition of significant fines or other sanctions, including the imposition of civil, criminal, and administrative penalties, damages, monetary fines, possible exclusion from participation in Medicare, Medicaid, and other federal healthcare programs, contractual damages, reputational harm, diminished profits and future earnings, and curtailment of operations, any of which could adversely affect our business, financial condition and results of operations. Whether or not we are successful in defending against such actions or investigations, we could incur substantial costs, including legal fees and reputational harm, and divert the attention of management in defending ourselves against any of these claims or investigations.

Our success depends upon our ability to retain highly skilled technical, managerial, marketing and finance personnel, and, to a significant extent, upon the efforts and abilities of our senior management. The resignation or departure of key personnel could adversely affect our business, financial condition, and operations. These individuals play crucial roles in our strategic decision-making, day-to-day operations and financial management. Their departure may lead to uncertainties, loss of expertise, and potential disruptions in our business continuity. Additionally, attracting and retaining qualified replacements for such key positions may be challenging, and any delays or difficulties in finding suitable successors could further impact our operations. If we lose the services of or fail to recruit key management personnel, we may not be able to successfully implement our business strategy and our business could be harmed. We have experienced significant changes in our senior management during 2023. In addition, we executed a significant management reorganization in 2023 that we believe will support the future growth of the Company. These or other changes in key management could create uncertainty among our employees, suppliers and other business partners and are resulting in changes to the strategic direction of our business, any of which could have a material adverse effect on us. If our management team is not successful in executing our strategy, our operating results and prospects for future growth may be adversely impacted. Failure to effectively identify, develop and retain other key personnel, recruit high-quality candidates and ensure smooth management and personnel transitions could also disrupt our business and adversely affect our results.

Our ability to successfully manage and grow the business and to develop new products depends, in large part, on our ability to recruit and retain qualified employees, particularly highly skilled technical, sales, service, management, and key staff personnel. Competition for qualified resources is intense and other companies may have greater resources available to provide substantial inducements and to offer more competitive compensation packages. If we are not successful in attracting and retaining highly qualified personnel, it could have a material adverse effect on our business, financial condition, and results of operations.

Costs associated with unexpected product defects and errata (deviations from published specifications) due to, for example, unanticipated problems in our manufacturing processes, include the costs of: - writing off the value of inventory of defective products;- disposing of defective products;- recalling defective products that have been shipped to customers;- providing product replacements for, or modifications to, defective products; and/or - defending against litigation related to defective products. These costs could be substantial and may, therefore, increase our expenses and lower our gross margin. In addition, our reputation with our customers or users of our products could be damaged as a result of such product defects and errata, and the demand for our products could be reduced. These factors could harm our financial results and the prospects for our business.

We must comply with, and are affected by, laws and regulations relating to the award, administration, and performance of various national government contracts. Awards received from such governments may be canceled or lose funding. Such government contracting parties may require us to increase or decrease production of certain products sold to such governments due to changes in strategy, priorities or other reasons, which could impact production of other products or sales to other customers to meet the requirements of such governments. In addition, such governments routinely retain rights to intellectual property developed in connection with government contracts. Such governments could exercise these rights in certain circumstances in the future, which could have the effect of decreasing the benefit we are able to realize commercially from such intellectual property. National government agencies routinely audit and investigate government contractors and can decrease or withhold certain payments when they deem systems subject to their review to be inadequate. Additionally, any costs found to be misclassified may be subject to repayment. If an audit or investigation uncovers improper or illegal activities, we may be subject to civil or criminal penalties and administrative sanctions, including reductions of the value of contracts, contract modifications or terminations, forfeiture of profits, suspension of payments, penalties, fines and suspension, or prohibition from doing business with such governments. In addition, we could suffer serious reputational harm if allegations of impropriety were made against it. Any such imposition of penalties, or the loss of such government contracts, could materially adversely affect our business, financial condition, results of operations and growth prospects.

Our business activities may be subject to the U.S. Foreign Corrupt Practices Act (the "FCPA"), and similar anti-bribery or anti-corruption laws, regulations or rules of other countries in which we operate. These laws generally prohibit companies and their employees and third-party business partners, representatives and agents from engaging in corruption and bribery, including offering, promising, giving or authorizing the provision of anything of value, either directly or indirectly, to a government official or commercial party in order to influence official action, direct business to any person, gain any improper advantage, or obtain or retain business. The FCPA also requires public companies to make and keep books and records that accurately and fairly reflect the transactions of the corporation and to devise and maintain an adequate system of internal accounting controls. Our business is heavily regulated and therefore involves significant interaction with government officials, including potentially officials of non-U.S. governments. In addition to our own employees, we may in the future leverage third parties to conduct our business abroad, such as obtaining government licenses and approvals. We and our third-party business partners, representatives and agents may have direct or indirect interactions with officials and employees of government agencies, state-owned or affiliated entities and we may be held liable for the corrupt or other illegal activities of our employees, our third-party business partners, representatives and agents, even if we do not explicitly authorize such activities. There is no certainty that our employees or the employees of our third-party business partners, representatives and agents will comply with all applicable laws and regulations, particularly given the high level of complexity of these laws. Violations of these laws and regulations could result in whistleblower complaints, adverse media coverage, investigations, loss of export privileges, debarment from U.S. government contracts, substantial diversion of management's attention, significant legal fees and fines, severe criminal or civil sanctions against us, our officers, or our employees, disgorgement and other sanctions and remedial measures, and prohibitions on the conduct of our business. Any such violations could include prohibitions on our ability to offer our products in one or more countries and could materially damage our reputation, our brand, our international expansion efforts, our ability to attract and retain employees, and our business, prospects, operating results, financial condition and stock price. The U.S. and various foreign governments have imposed controls, export license requirements and restrictions on the import or export of certain products, technologies, and software. We must export our products in compliance with U.S. export controls and we may not always be successful in obtaining necessary export licenses. Our failure to obtain the required import or export approval for our products or limitations on our ability to export or sell our products imposed by these laws may harm our international and domestic revenues. Noncompliance with these laws could have negative consequences, including government investigations, penalties and reputational harm. Changes in our products or changes in export, import and economic sanctions laws and regulations may delay our introduction of new products in international markets, prevent our customers from deploying our products internationally or, in some cases, prevent the export or import of our products to or from certain countries altogether. In addition to the tariffs imposed by the U.S. Government on certain items imported from China, it is possible that additional sanctions or restrictions may be imposed by the United States on items imported into the United States from China. Similarly, in addition to the tariffs imposed by China on certain items imported from the United States, it is possible that additional sanctions or restrictions may be imposed by China on items imported into China from the United States. Any such measures could further adversely affect our ability to sell our products to existing or potential customers and harm our ability to compete internationally and grow our business. In addition, generally, tariffs may materially increase the cost of our raw materials and finished goods, may negatively impact our margins as we may not be able to pass on the additional cost through increasing the prices of our products, and may cause the contraction of certain industries, including the Industrial market. Any change in export or import regulations or legislation, shift or change in enforcement, or change in the countries, persons or technologies targeted by these regulations, could result in decreased use of our products by, or in our decreased ability to export or sell our products to, existing or potential customers with international operations. In such an event, our business, financial condition, results of operations and growth prospects could be materially adversely affected.

Because we engage in manufacturing activities in multiple jurisdictions and conduct business with our customers located worldwide, such activities are subject to a myriad of governmental regulations. Our failure to comply with any such laws or regulations, as amended from time to time, and our failure to comply with any information and document sharing requests from the relevant authorities in a timely manner could result in: - Significant penalties and legal liabilities, such as the denial of import or export permits or third-party private lawsuits, criminal or administrative proceedings;- The temporary or permanent suspension of production of the affected products;- The temporary or permanent inability to procure or use certain production critical chemicals or materials;- Unfavorable alterations in our manufacturing, assembly and test processes;- Challenges from our customers that place us at a significant competitive disadvantage, such as loss of actual or potential sales contracts in case we are unable to satisfy the applicable legal standard or customer requirement;- Restrictions on our operations or sales;- Loss of tax benefits, including termination of current tax incentives, disqualification of tax credit applications and repayment of the tax benefits that we are not entitled to; and - Damages to our goodwill and reputation. Complying with applicable laws and regulations, such as environmental and climate related laws and regulations, could also require us, among other things, to do the following: (a) purchase, use or install remedial equipment; (b) implement remedial programs such as climate change mitigation programs; (c) modify our product designs and manufacturing processes, or incur other significant expenses such as obtaining renewable energy sources, renewable energy certificates or carbon credits, substitute raw materials or chemicals that may cost more or be less available for our operations. Our inability to timely obtain approvals necessary for the conduct of our business could impair our operational and financial results. For example, if we are unable to timely obtain environmental related approvals needed to undertake the development and construction of a new fab or expansion project, then such inability may delay, limit, or increase the cost of our expansion plans that could also in turn adversely affect our business and operational results. In light of increased public interest in environmental issues, our operations and expansion plans may be adversely affected or delayed responding to public concern and social environmental pressures even if we comply with all applicable laws and regulations.

Our research and development and manufacturing operations involve the use of some hazardous substances and are subject to a variety of federal, state, local, and foreign environmental laws and regulations relating to the storage, use, discharge, disposal, remediation of, and human exposure to, hazardous substances and the sale, labeling, collection, recycling, treatment, and disposal of products containing hazardous substances. Liability under environmental laws and regulations can be joint and several and without regard to fault or negligence. Compliance with environmental laws and regulations may be expensive and noncompliance could result in substantial liabilities, fines and penalties, personal injury and third-party property damage claims and substantial investigation and remediation costs. Environmental laws and regulations could become more stringent over time, imposing greater compliance costs, and increasing risks and penalties associated with violations. We cannot assure you that violations of these laws and regulations will not occur in the future or have not occurred in the past as a result of human error, accidents, equipment failure or other causes. The expense associated with environmental regulation and remediation could harm our financial condition and operating results.

Our research and development and manufacturing processes require the transportation, storage and use of hazardous materials, including chemicals, and may result in the generation of hazardous waste. National and local laws and regulations in many of the jurisdictions in which we operate impose substantial potential liability for the improper use, manufacture, handling, storage, transportation and disposal of hazardous materials as well as for land contamination, and, in some cases, this liability may continue over long periods of time. Despite our compliance efforts, we cannot eliminate the risk of industrial accidents that may lead to discharges or releases of hazardous materials and any resultant injury, property damage or environmental contamination from these materials. For example, real properties that we owned or used in the past or that we own or use now or in the future may contain detected or undetected contamination resulting from our operations at those sites or the activities of prior owners or occupants. We may suffer from expenses, claims or liability which may fall outside of or exceed our insurance coverage. Furthermore, changes to current environmental laws and regulations may impose further compliance requirements on us that may impair our research, development and production efforts as well as our other business activities. New and evolving regulatory requirements include producer responsibility frameworks and regulations related to addressing climate change or other emerging environmental areas. Increased environment, health and safety laws, regulations and enforcement could result in substantial costs and liabilities to us and could subject our use, manufacture, handling, storage, transportation, and disposal of hazardous materials to additional constraints. Consequently, compliance with these laws could result in capital expenditures as well as other costs and liabilities, thereby adversely affecting business, financial position and results of operations.

Certain investor advocacy groups, institutional investors, proxy advisory services, stockholders, government, regulators, employees, customers and other stakeholders remain focused on environmental, social and governance ("ESG") practices of companies. Additionally, public interest and legislative pressure related to public companies' ESG practices continues. If our ESG practices fail to meet regulatory requirements or investor or other stakeholders' evolving expectations and standards for responsible business practices in numerous areas, including climate change and greenhouse gas emissions, environmental stewardship, support for communities where we operate, human and civil rights, director and employee diversity, human capital management, employee health and safety practices, product quality and safety, data security, supply chain management, regulatory compliance, corporate governance and transparency and employing ESG strategies within business operations, our brand, reputation and employee retention may be negatively impacted and customers and suppliers may be unwilling to do business with us. As we work to align our ESG practices with industry standards, we will be dealing with uncertainties and risks resulting from the forward-looking nature of many ESG issues, In addition, we will continue to expand our disclosures in these areas and doing so may result in additional costs and require additional resources to monitor, report, and comply with our various ESG practices. If we fail to adopt ESG standards or practices as quickly as stakeholders desire, report on our ESG efforts or practices accurately, or satisfy the expectations of stakeholders, our reputation, business, financial performance and growth may be adversely impacted.

Our future success will depend in part on our ability to generate sales of our products as well as generate development revenue. Current and potential customers may have substantial investment in, and know-how related to our technologies. Customers may be reluctant to change from incumbent suppliers or cease using their own solutions, or our products may miss the design and procurement cycles of our customers. Many target markets have historically been slow to adopt new technologies. These markets often require long testing and qualification periods or lengthy government approval processes before admitting new suppliers or adopting new technologies. The introduction of new products and product enhancements will require that we effectively transfer production processes from research and development to manufacturing and coordinate efforts with those suppliers to achieve increased production volume rapidly. If we are unable to implement this strategy to develop new applications and end markets for products or develop new products, the business, financial condition, results of operations and growth prospects could be materially adversely affected. In addition, any newly developed or enhanced products may not achieve market acceptance or may be rendered obsolete or less competitive by the introduction of new products by other companies. For example, we are currently developing VLEPSIS technology, a ground-breaking, multiple-gigapixel, turnkey wide area motion imagery system, which tracks and monitors hundreds of objects/locations simultaneously, in stunning detail and resolution. It is set to launch in fiscal 2024. If we are unable to deliver products that meet our customers' expectations, our business, financial condition, results of operations, and cash flows will be adversely affected.

Most of our revenues are currently derived from development activities. While we strive to develop innovative products available for commercial use, we have not yet achieved mass commercial production or generated substantial revenues from product sales. The success of our future products remains uncertain, and there is no guarantee that we will be able to bring any products to market that are accepted by our customers. As a result, our financial performance and ability to sustain operations may be materially impacted.

We are unable to discern a pattern in or otherwise predict the amount of any payments for the sale or licensing of intellectual property that we may receive. Consequently, we are unable to plan on the timing of intellectual property revenues and our results of operations may be adversely affected by a reduction in future estimated intellectual property revenues.

From time to time, we may identify products that we believe infringe on our patents and may have to initiate litigation to enforce our patent rights against those products. Litigation stemming from such disputes could harm our ability to gain new customers, who may postpone licensing decisions pending the outcome of the litigation or who may, as a result of such litigation, choose not to adopt our technologies. Such litigation may also harm our business relationships with existing customers, who may, because of such litigation, cease making royalty or other payments to us or challenge the validity and enforceability of our patents or the scope of our related agreements. In addition, the costs associated with legal proceedings are typically high, relatively unpredictable and not completely within our control. These costs may be materially higher than expected, which could adversely impair our working capital, affect our operating results and lead to volatility in the price of our common stock. Whether or not determined in our favor or ultimately settled, litigation would divert managerial, technical, legal and financial resources from our business operations. Furthermore, an adverse decision in any of these legal actions could result in a loss of our proprietary rights, subject us to significant liabilities, require us to seek licenses from others, limit the value of our technology or otherwise negatively impact the price of our common stock, business and financial position, results of operations and cash flows. Even if we prevail in a legal action, significant contingencies may exist to the settlement and final resolution, including the scope of the liability of each party, our ability to enforce judgments against the parties, the ability and willingness of the parties to make any payments owed or agreed upon, and the dismissal of the legal action by the relevant court, none of which are completely within our control. Parties that may have financial obligations to us could be insolvent or decide to alter their business activities or corporate structure, which could affect our ability to collect royalties from such parties.

Various business segments in which we operate are characterized by frequent allegations of intellectual property infringement. Any allegation of infringement could be time consuming and expensive to defend or resolve, result in substantial diversion of management resources, cause suspension of operations or force us to enter into royalty, license, or other agreements rather than dispute the merits of such allegation. Furthermore, third parties making such claims may be able to obtain injunctive or other equitable relief that could block our ability to further develop or commercialize some or all of our technologies, and the ability of our customers to develop or commercialize their products incorporating our technologies, in the U.S. and abroad. If patent holders or other holders of intellectual property initiate legal proceedings, we may be forced into protracted and costly litigation. We may not be successful in defending such litigation and may not be able to procure any required royalty or license agreements on acceptable terms or at all.

Our revenues depend on our ability to maintain and secure new OEM customers and system integrators, crucial for incorporating our products into their systems. The successful integration and sales of these systems are essential for our financial outcomes. Challenges such as limited marketing resources, reluctance in research and development investment by these partners, and the development of competitive products by our OEM customers and others could adversely affect demand for our products, impacting our revenues and financial performance. Additionally, our financial success is intertwined with our products being designed into our customers' products at the design stage. The commercial success of these designs, the possibility of customers manufacturing these designs in significant quantities, and the risk of our products being replaced in future redesigns or by competitors' components underscore the precarious nature of our revenue streams. The dynamic nature of product development and design competitions presents further uncertainties, with new generations of customer products not necessarily resulting in design wins for us, which could lead to reduced revenues and profitability. The combined effect of these factors underscores the critical importance of our relationship with OEM customers and system integrators in securing design wins and achieving commercial success, which are pivotal for our sustained revenue growth and financial stability.

Changes in the mix of types of products sold may have a substantial impact on our revenues and gross profit margins. In addition, more recently introduced products tend to have higher associated costs because of initial overall development costs and higher start-up costs. Fluctuations in the mix and types of our products may also affect the extent to which we are able to recover our fixed costs and investments that are associated with a particular product or wafer foundry, and, as a result, can negatively impact our financial results.

Our distributors and sales representatives could reduce or discontinue sales of our products. They may not devote the resources necessary to sell our products in the volumes and within the time frames that we expect. In addition, we depend upon the continued viability and financial resources of these distributors and sales representatives, some of which are small organizations with limited working capital. These distributors and sales representatives, in turn, depend substantially on general economic conditions and conditions within the semiconductor industry. We believe that our success will continue to depend upon these distributors and sales representatives. Foreign distributors are typically granted longer payment terms, resulting in higher accounts receivable balances for a given level of sales than domestic distributors. Our risk of loss from the financial insolvency of distributors is, therefore, disproportionally weighted to foreign distributors. If any significant distributor or sales representative experiences financial difficulties, or otherwise becomes unable or unwilling to promote and sell our products, our business could be harmed.

We typically plan our production and inventory levels based on our expectations for customer demand. Actual customer demand, however, can be highly unpredictable and can fluctuate significantly. In response to anticipated long lead times to obtain inventory and materials, we order materials and production in advance of customer demand. This advance ordering and production may result in excess inventory levels or unanticipated inventory write-downs if expected orders fail to materialize.